Most mornings, a shaggy pixie needs about ten minutes: sea salt or texture spray, a rough-dry with your fingers, and a little paste twisted through the front. The crown usually sits at three inches with longer pieces at the temples and nape, and a trim every five to eight weeks keeps those layers from going soft.
1. The Classic Shaggy Pixie

Short layers run through the crown of the classic shaggy pixie, with longer pieces left at the temples and nape. On dry hair I point cut the crown at three inches, keep the temple and nape pieces at five, and razor the ends so nothing sits in a line. Oval and square faces with medium to thick density and 1B to 2B texture suit it. Rough-dry using sea salt spray, then shake it out. Trim every six weeks.
2. The Shaggy Pixie Bob
The longest version is the shaggy pixie bob, with a short-layered crown and a front that reaches the earlobe. Working dry, I point cut the crown at three inches, angle the front down to the earlobe, and razor the nape and ends. Oval and heart faces with medium to thick density and 1B to 2B texture suit it. Rough-dry using a texture spray and twist the front pieces with paste. Trim every six weeks.
3. Fine-Hair Shaggy Pixie
On fine hair, a shaggy pixie keeps its layers in the crown only so the perimeter stays full. On dry hair I point cut shallow crown layers at three inches, leave the nape and sides blunt at two inches, and skip the razor. Oval and round faces with fine density and 1A to 2A texture suit it. Put mousse at the damp roots, rough-dry, and piece the crown with a light paste. Trim every six weeks.
4. Curtain-Bang Shaggy Pixie
On a shaggy pixie, curtain bangs part in the center and drop to the cheekbone, blending into the temple pieces. Working dry, I point cut the crown at three inches, section a triangle, cut the bangs from brow to cheekbone, and razor the ends. Round and square faces with fine to medium density and 1B to 2B texture suit it. Dry the bangs outward with a round brush and rough-dry the rest. Trim every five weeks.
5. Thick-Hair Shaggy Pixie Bob
On thick hair, a shaggy pixie relies on its layers to take out weight so the shape doesn’t balloon. On dry hair I point cut the crown at three inches, angle the front to the earlobe, point cut internal layers through the sides, and razor the ends. Any face shape with thick density and 1B to 2C texture can wear it. Rough-dry using a smoothing cream and a texture spray. Trim every six weeks.
6. Shaggy Pixie for Women Over 50
For the shaggy pixie over 50, I keep soft crown layers and sweep the fringe to the cheekbone to cover the forehead. Working dry, I point cut the crown at three inches, leave the sides over the ear, and cut the fringe from the part to the cheekbone. Most face shapes with fine to medium density and 1A to 2A texture can wear it. Use a volumizing mousse and a small round brush to blow-dry. Trim every six weeks.
7. The Wavy Shaggy Pixie
With four inches left on top, the layers of a wavy shaggy pixie bend rather than stand up. On dry hair I point cut the crown, keep the nape and temple pieces at five inches, and razor the ends. Oval and heart faces with medium density and 1C to 2B texture suit it. Scrunch sea salt spray into damp hair, rough-dry, then twist a few pieces with paste. Trim every six weeks.
8. Undercut Shaggy Pixie
Under a shaggy pixie, an undercut keeps the nape clipped short so the layered top falls over a clean edge. Working dry, I clipper the nape to a number two, point cut the crown at three inches, keep the temple pieces at five, and razor the ends. Oval and heart faces with medium to thick density and 1A to 2B texture suit it. Rough-dry using a texture spray and piece it with wax. Buzz the undercut every three weeks.
9. Round-Face Shaggy Pixie Bob
On a round face, a shaggy pixie keeps height at the crown and brings the front past the earlobe to lengthen the face. On dry hair I point cut the crown at three inches, angle the front to the jaw, and razor the ends. Medium to thick density and 1B to 2B texture work. Rough-dry upside down using a volumizing spray, then smooth the front down. Trim every six weeks.
10. Razor-Cut Shaggy Pixie
I cut a razor cut shaggy pixie with nothing but a razor, so every end tapers and none finishes blunt. The crown gets razored at three inches on damp hair, then the nape and temple pieces at five on dry hair. Oval and square faces with medium to thick density and 1B to 2B texture suit it. Rough-dry using sea salt spray, then shake it out. Trim every six weeks.
11. Shaggy Pixie for Women Over 60
A shaggy pixie over 60 gets three-inch crown layers, soft sides over the ear, and ends that are point cut instead of razored so they keep their thickness. I work on dry hair and texturize lightly. Any face shape with fine to medium density and 1A to 2A texture can wear it. Put mousse at the roots and blow-dry with a small round brush. Trim every six weeks and gloss every eight.
12. The Curly Shaggy Pixie
I cut a curly shaggy pixie dry, one curl at a time, keeping the crown curls shorter than those at the temples and nape. The crown goes to three inches of shrunken length, the nape and temple curls stay at five, and I shape each curl from there. Oval and heart faces with medium to thick density and 3A to 3C texture suit it. Rake curl cream through wet hair and diffuse on low. Trim every eight weeks.
13. Money-Piece Shaggy Pixie Bob
On a shaggy pixie bob, a money piece brightens the front pieces where they fall toward the earlobe. Working dry, I point cut the crown at three inches, angle the front down, razor the ends, then lift the two front sections to a level nine and tone them beige. Fine to medium density and 1B to 2B texture work. Rough-dry using a texture spray and piece out the front. Refresh every ten weeks.
14. Wispy-Bang Shaggy Pixie
On a shaggy pixie, I point cut wispy bangs thin so they rest between the brows above the layered crown. On dry hair I point cut the crown at three inches, cut the bangs at the brow, point cut them until they separate, and razor the nape. Oval and oblong faces with fine to medium density and 1A to 2A texture suit it. Dry the bangs down and rough-dry everything else. Trim the bangs every four weeks.
15. The Copper Shaggy Pixie
On a shaggy pixie, copper looks bright on each separated layer. Working dry, I point cut the crown at three inches, razor the temple and nape pieces, then put a level seven copper at the root and a demi through the ends. Fine to medium density and warm skin tones suit it. Rough-dry using a texture spray and finish with a shine serum. Trim every six weeks and refresh the tone every five.
16. Balayage Shaggy Pixie Bob
On a shaggy pixie bob, I paint balayage on the front pieces and the ends of the crown layers so the light lands where the pieces separate. On dry hair I point cut the crown at three inches, angle the front to the earlobe, razor the ends, and hand paint to a level nine. Fine to thick density and 1B to 2B texture work. Rough-dry using a texture spray. Refresh every twelve weeks.
17. Square-Face Shaggy Pixie
On a square face, a shaggy pixie keeps a rounded crown and temple pieces that fall past the cheekbone to soften the corners. Working dry, I point cut the crown at three inches, keep the temple pieces at five, and razor the ends. Medium to thick density and 1B to 2B texture work. Rough-dry using a texture spray and push the temple pieces forward. Trim every six weeks.
18. Shadow-Root Shaggy Pixie
On a blonde shaggy pixie, a shadow root holds depth at the crown and keeps the layered ends bright. On dry hair I point cut the crown at three inches and razor the ends, then put a level six demi at the root and leave the lengths at level nine. Fine to medium density and 1A to 2B texture work. Rough-dry using a texture spray and piece out the ends. Trim every six weeks and refresh the root every ten.
19. Straight-Hair Shaggy Pixie Bob
Every layer shows when a shaggy pixie is on straight hair, so I point cut deep and keep the layers disconnected. Working dry, I point cut the crown at three inches, angle the front to the earlobe, and point cut an inch into each end. Oval and square faces with medium to thick density and 1A to 1C texture suit it. Paddle-brush it flat while drying and piece the ends with wax. Trim every five weeks.
20. The Dark Brunette Shaggy Pixie
Against the skin, dark brunette makes the separated layers of a shaggy pixie read as sharp lines. On dry hair I point cut the crown at three inches, razor the temple and nape pieces, and apply a level four demi root to end. Fine to thick density and cool or neutral skin tones suit it. Rough-dry using a texture spray and finish with serum. Refresh the tone every eight weeks.
21. Long-Fringe Shaggy Pixie
On a shaggy pixie, a long fringe brings the crown layers forward into a piece that drops to the cheekbone on one side. Working dry, I point cut the crown at three inches, keep the front at five, angle it to the cheekbone, and razor the ends. Round and square faces with medium to thick density and 1B to 2B texture suit it. Rough-dry with the fringe pushed to one side. Trim every five weeks.
22. Air-Dry Shaggy Pixie Bob
For a shaggy pixie bob that air-dries, I razor every end so the layers settle into place with no brush. On dry hair I point cut the crown at three inches, angle the front to the earlobe, and razor each end. Any face shape with fine to medium density and 1C to 2B texture can wear it. Work a light cream into damp hair, scrunch, and leave it alone. Trim every eight weeks.
23. The Platinum Shaggy Pixie
Because platinum shows every layer of a shaggy pixie so clearly, the texture needs to be even. Working dry, I point cut the crown at three inches in even increments, razor the nape, then lift to a level ten and tone with violet toner. Fine to medium density and cool skin tones suit it. Rough-dry using a light paste and use a bond builder weekly. Retouch every four weeks.
24. Shaggy Pixie With Face-Framing Pieces
On a shaggy pixie, the face framing pieces are the longest hairs, left at the temples so they fall past the cheekbone. On dry hair I point cut the crown at three inches, keep the temple pieces at six, and razor them to a taper. Square and round faces with fine to thick density and 1B to 2B texture suit it. Rough-dry using a texture spray and push the pieces forward. Trim every six weeks.
25. The Gray Shaggy Pixie
Gray on a shaggy pixie looks modern when the crown layers have lift and the ends are pieced out. Working dry, I point cut the crown at three inches, leave the sides over the ear, and point cut the ends. Any face shape with fine to medium density and 1A to 2A texture can wear it. Lift the crown with a round brush as you dry, piece the ends with paste, and finish with a violet-toned serum. Trim every six weeks.
Read next: pixie cut with bangs and wavy pixie cut.
A shaggy pixie works best when the layers are left a little uneven, because that imperfection is what gives it the lived-in feel. Rough-dry and the shape appears on its own.























