Shag Haircut Without Bangs: Clear the Forehead

Skipping the fringe means nothing to pin back on a gym day and nothing to re-blow-dry when humidity flattens it by afternoon. Most of these looks start with a dry cut, a point-cut crown around four inches, and a face frame from the cheekbone or chin. A shag haircut without bangs grows out cleanly over eight weeks.

1. Center-Part Shag Haircut Without Bangs

Of every shag haircut without bangs I do, the one I cut most uses a center part and a face frame from the cheekbone, so the front opens up rather than falling across the forehead. Working on dry hair, I set the perimeter at the collarbone, point cut a four-inch crown, and razor the face frame starting at the cheekbone. Fine to medium density with 1B to 2B texture suits it on oval and heart faces. Use texture spray to rough-dry. Trim every eight weeks.

2. Past-the-Shoulder Long Shag Haircut No Bangs

This long shag haircut no bangs leaves the length past the shoulder and begins the face frame at the chin. With hair dry, I cut the perimeter below the shoulder, point cut a four-inch crown, and razor the face frame from the chin. Medium to thick density and 1B to 2C texture suit it on round, square, and oval faces. Use texture spray to rough-dry and lift the crown. Trim every ten weeks.

3. Cheekbone Face-Frame Shag

Putting the face frame at the cheekbone gives a shag movement at the front with no fringe. Working dry, I set the perimeter at the collarbone, point cut a four-inch crown, and point cut the face frame from cheekbone to collarbone. Fine to thick density with 1A to 2B texture suits it on square and round faces. Use a round brush to blow-dry the face frame back off the face. Trim every eight weeks.

4. Shag Without Bangs Cut for Fine Hair

On fine hair, a shag without bangs keeps all the front weight, because none of it goes into a fringe. I hold the shears flat to cut the perimeter at the collarbone on dry hair, point cut three crown layers, and point cut a face frame starting at the chin. Fine density and 1A to 2A texture suit it on oval faces. Work mousse into damp roots and blow-dry the crown upward. Trim every six weeks.

5. Side-Part Shag Haircut Without Bangs

Pairing a shag haircut without bangs with a side part lets the front piece sweep over the forehead like a long fringe. With hair dry, I cut the perimeter at the collarbone, point cut a four-inch crown, place the part two inches off center, and razor the face frame from the cheekbone. Fine to thick density and 1A to 2B texture suit it on round and square faces. Rough-dry it and push the heavy side back. Trim every eight weeks.

6. Shag Without Bangs Cut for Thick Hair

For thick hair, a shag without bangs depends on razored internal layers to keep the front open and light. Working dry, I cut the perimeter past the collarbone, razor internal layers through the sides, point cut a four-inch crown, and razor the face frame from the cheekbone. Thick density with 1B to 2C texture suits it on any face shape. Use a light cream to rough-dry and let the ends fall where they want. Trim every eight weeks.

7. Long Shag Haircut No Bangs for Over 50

My long shag haircut no bangs over 50 has a five-inch crown and a face frame that begins at the chin, so the front blows back. With hair dry, I cut the perimeter past the collarbone, point cut the crown, and point cut the face frame from the chin. Fine to medium density and 1A to 2A texture suit it. Use a smoothing cream and a round brush to blow-dry. Trim every eight weeks.

8. The Wavy Shag Without Bangs

On 2A to 2C hair, a wavy shag without bangs lets the front wave drop to either side of the face. Working dry, I set the perimeter at the collarbone, point cut a four-inch crown, and razor the face frame from the cheekbone. Fine to medium density suits it on oval and square faces. Scrunch mousse through damp hair, center part it, and air-dry. Trim every eight weeks.

9. Chin-Length Face-Frame Shag

Starting the face frame at the chin keeps the front of the shag long enough to tuck behind an ear. With hair dry, I cut the perimeter at the collarbone, point cut a four-inch crown, and point cut the face frame from chin to collarbone. Fine to medium density with 1A to 2B texture suits it on round and oblong faces. Use texture spray to rough-dry and tuck one side back. Trim every eight weeks.

10. Shag Haircut Without Bangs Cut for Round Faces

For a round face, a shag haircut without bangs begins the face frame below the chin and keeps the crown high. Working dry, I cut the perimeter at the collarbone, point cut the crown to three inches, and razor the face frame starting below the chin. Fine to thick density and 1A to 2B texture suit it. Use texture spray to rough-dry and lift the crown. Trim every eight weeks.

11. The Curly Shag Without Bangs

I cut a curly shag without bangs dry and curl by curl, starting the face frame at the cheekbone so no curl lands on the forehead. The perimeter goes in at the shoulder curl by curl, then a four-inch crown, then the face frame from the cheekbone. Medium to thick density and 3A to 3C texture suit it on oval and heart faces. Rake curl cream through wet hair and diffuse on low. Trim every ten weeks.

12. Balayage Long Shag Haircut No Bangs

With balayage on a long shag haircut no bangs, the brightest pieces land in the face frame from the cheekbone down. On dry hair I cut the perimeter past the collarbone, point cut a four-inch crown, razor the face frame from the cheekbone, and hand paint the face frame and ends to level nine. Fine to thick density with 1B to 2B texture suits it. Use texture spray to rough-dry. Refresh every twelve weeks.

13. Shag Without Bangs for Over 60

My shag without bangs over 60 has the perimeter at the shoulder, a five-inch crown, and a face frame from the chin that blows back off the face. Everything is cut on dry hair and point cut throughout, then the ends get a light texturizing. Fine to medium density with 1A to 2A texture suits it. Use mousse and a round brush to blow-dry the crown up and the front back. Trim every eight weeks and gloss every eight.

14. Razor-Cut Shag Without Bangs

In a razor cut shag without bangs, every end is tapered, the face frame included, so the front melts into the length. With hair dry, I razor the perimeter at the collarbone, razor a four-inch crown, and razor the face frame from the cheekbone. Medium to thick density and 1B to 2B texture suit it on any face shape. Use a light cream to rough-dry and let the ends fall where they want. Trim every eight weeks.

15. Money-Piece Shag Without Bangs

On a shag without bangs, a money piece brightens the two face framing pieces from the cheekbone down. Working dry, I cut the perimeter at the collarbone, point cut a four-inch crown, razor the face frame from the cheekbone, and lift the two front sections to level nine before toning beige. Fine to medium density with 1A to 2B texture suits it. Rough-dry and blow the front back off the face. Refresh every ten weeks.

16. Shag Haircut Without Bangs Cut for Square Faces

For a square face, a shag haircut without bangs curves the face frame outward before the jaw and keeps the forehead clear. With hair dry, I cut the perimeter at the collarbone, point cut a four-inch crown, and razor the face frame from the cheekbone so it flares out past the jaw. Fine to thick density and 1A to 2B texture suit it. Use texture spray to rough-dry and keep the face frame forward. Trim every eight weeks.

17. Shoulder Length Shag Without Bangs, Chin Frame

This shoulder length shag without bangs has a face frame at the chin and a four-inch crown. Working dry, I set the perimeter at the shoulder, point cut layers starting at the chin, and point cut the crown. Fine to medium density with 1A to 2B texture suits it on any face shape. Use texture spray to rough-dry and part it wherever it falls. Trim every eight weeks.

18. The Copper Shag Without Bangs

On a shag without bangs, copper puts its brightest color in the face frame, where light lands first. With hair dry, I cut the perimeter at the collarbone, point cut a four-inch crown, razor the face frame from the cheekbone, and apply level seven copper root to end. Fine to medium density and warm skin tones suit it. Use texture spray to rough-dry. Refresh the tone every five weeks.

19. Wolf-Cut-Layered Long Shag Haircut No Bangs

This long shag haircut no bangs with wolf cut layers stacks a three-inch crown over long lengths and begins the face frame at the cheekbone. Working dry, I cut the perimeter below the shoulder, point cut the crown, and razor the face frame and lengths. Medium to thick density and 1B to 2C texture suit it on oval, square, and heart faces. Use texture spray to rough-dry and lift the crown. Trim every eight weeks.

20. Shag Without Bangs Cut for Straight Hair

On straight hair, a shag without bangs needs deep point cutting in the face frame. With hair dry, I cut the perimeter at the collarbone, point cut a four-inch crown, and point cut deep into the face frame from the cheekbone. Fine to medium density with 1A to 1C texture suits it on any face shape. Lift the crown with the blow-dryer and use a flat iron to bend the face frame outward. Trim every eight weeks.

21. The Dark Brunette Shag Without Bangs

On a shag without bangs, dark brunette looks sleek at the front and reveals the layers only once the hair moves. Working dry, I cut the perimeter at the collarbone, point cut a four-inch crown, razor the face frame from the cheekbone, and apply a level four demi root to end. Fine to thick density and cool or neutral skin tones suit it. Use a light cream to rough-dry. Refresh the tone every eight weeks.

22. Air-Dried Shag Haircut Without Bangs

For the air-dry version, I cut a four-inch crown and a face frame starting at the chin so the front drops to the sides. With hair dry, I set the perimeter at the collarbone, point cut the crown, and point cut the face frame. Fine to medium density with 1C to 2B texture suits it on any face shape. Smooth a light cream through damp hair and don’t touch it until dry. Trim every eight weeks.

23. Shadow-Root Shag Without Bangs

On a blonde shag without bangs, a shadow root keeps the crown deep and the face frame bright. Working dry, I cut the perimeter at the collarbone, point cut a four-inch crown, razor the face frame from the cheekbone, then put a level six demi on the root and leave the lengths at level nine. Fine to medium density with 1A to 2B texture suits it. Use texture spray to rough-dry. Refresh the root every ten weeks.

24. The Choppy Shag Without Bangs

For a choppy shag without bangs, I point cut an inch into the crown and face frame so the pieces break apart. With hair dry, I cut the perimeter at the collarbone, point cut a four-inch crown, and point cut deep through the face frame from the cheekbone. Medium to thick density and 1B to 2B texture suit it on oval and square faces. Use texture paste to rough-dry and separate the pieces. Trim every eight weeks.

25. Shag Without Bangs Cut for Oval Faces

Since an oval face needs no balancing, a shag without bangs can take a face frame from the cheekbone and a three-inch crown. Working dry, I cut the perimeter at the collarbone, point cut the crown, and razor the face frame from the cheekbone. Fine to thick density with 1A to 2B texture suits it. Use texture spray to rough-dry and finish the crown with a light paste. Trim every eight weeks.

For a similar shape, see long bob haircuts and angled bob haircuts.

A shag haircut without bangs leaves the forehead clear, which suits a face that does not need the fringe, and the layers still do the framing. Tuck one side back and the shape opens up.

Jenna Living
New mom embracing the chaos and creativity! 💕 Sharing budget-friendly tips for cooking, DIY hacks, home decor, fashion, and making every moment stylish and affordable
Scroll to Top