A long bob cut to the collarbone still pulls back into a low ponytail for the gym, but it blow-dries with a round brush in a fraction of the time longer hair takes. What makes these long bob haircuts work is where the perimeter sits and where the layers start, matched to your density, texture, and face shape.
1. Collarbone Blunt Long Bob
Of all the long bob haircuts, the blunt one is what I show a new client first, since that solid collarbone line does all the work. With hair dry and the shears held flat, I cut the perimeter at the collarbone and texturize just the final half inch. Fine to thick density and 1A to 1C texture suit it on oval and heart faces. Use a paddle brush to blow-dry flat, then finish with serum. Trim every eight weeks.
2. Chin-Layered Long Bob Haircuts
These long bob haircuts with layers from the chin hold the perimeter at the collarbone and let the interior move. Working on dry hair, I cut the perimeter with point cut ends, then point cut layers beginning at the chin so the ends still look full. Fine to medium density and 1A to 2B texture suit most face shapes. Roll the ends under with a round brush as you blow-dry and finish with a light cream. Trim every eight weeks.
3. Curtain-Bang Long Bob
On a long bob, curtain bangs frame the face from brow to cheekbone while the perimeter stays solid. With hair dry, I cut the perimeter at the collarbone with point cut ends, take a triangle section, and cut the bangs from the brow down to the cheekbone. Fine to medium density with 1B to 2B texture suits it on round and square faces. Use a small round brush to blow the bangs out. Trim the bangs every five weeks.
4. Long Bob Cut for Fine Hair
On fine hair, a long bob stays blunt at the perimeter so the ends look thick, and there are no layers below the cheekbone. Holding the shears flat, I cut the perimeter at the collarbone on dry hair, then point cut two short crown layers for lift. Fine density and 1A to 2A texture suit it on oval and oblong faces. Work mousse into damp roots and use a round brush to blow-dry. Trim every six weeks.
5. The Wavy Long Bob
In a wavy long bob, the bend sits between chin and collarbone so the ends look fuller than they really are. Working dry, I cut the perimeter at the collarbone with point cut ends and add a single long layer at the chin. Fine to medium density with 1B to 2B texture suits any face shape. Use a one-inch iron for the waves, leave the final inch straight, and break them up with texture spray. Trim every eight weeks.
6. Layered Long Bob Haircuts for Thick Hair
On thick hair, long bob haircuts with layers rely on internal layers to remove bulk so the perimeter lies flat. With hair dry, I cut the perimeter at the collarbone with point cut ends, then point cut internal layers through the sides and back while leaving the outline alone. Thick density and 1A to 2B texture suit any face shape. Use a smoothing cream and a paddle brush to blow-dry flat. Trim every eight weeks.
7. The Angled Long Bob
With an angled long bob, the front falls two inches longer than the back so the line sweeps forward. Working dry, I cut the back at the shoulder, angle the front down to the collarbone, and point cut the ends. Fine to thick density and 1A to 2A texture suit it on round and square faces. Use a round brush to blow-dry smooth and finish with serum. Trim every six weeks.
8. Long Bob for Over 50
My long bob over 50 holds the perimeter at the collarbone, with soft layers from the chin and a side swept fringe reaching the cheekbone. With hair dry, I cut the perimeter with point cut ends, point cut layers starting at the chin, and cut the fringe from the part down to the cheekbone. Fine to medium density with 1A to 2A texture suits it. Use a smoothing cream and a round brush to blow-dry. Trim every eight weeks.
9. The Shaggy Long Bob
For a shaggy long bob, I add crown layers and a razored face frame to the collarbone length. Working dry, I cut the perimeter at the collarbone, point cut the crown layers to four inches, and razor a face frame starting at the cheekbone. Fine to medium density and 1B to 2B texture suit it on oval and square faces. Use texture spray to rough-dry and lift the crown. Trim every eight weeks.
10. Side-Part Layered Long Bob Haircuts
With a side part, long bob haircuts with layers sit heavier on one side, so the layers look like a sweep. With hair dry, I cut the perimeter at the collarbone with point cut ends, point cut layers starting at the chin, and place the part two inches off center. Fine to thick density with 1A to 2B texture suits it on round and square faces. Use a round brush to blow-dry and push the heavy side back. Trim every eight weeks.
11. The Curly Long Bob
I cut a curly long bob dry and curl by curl, so once the curl springs up the perimeter sits at the collarbone. The perimeter goes in curl by curl, then layers from the chin so the curl stacks without forming a triangle. Medium to thick density and 3A to 3C texture suit it on oval and heart faces. Rake curl cream through wet hair and diffuse on low. Trim every ten weeks.
12. Wispy-Bang Long Bob
On a long bob, I point cut wispy bangs thin enough to sit between the brows with no weight. Working dry, I cut the perimeter at the collarbone with point cut ends, then cut the bangs at brow level and point cut until they separate. Fine to medium density with 1A to 2A texture suits it on oval and oblong faces. Blow-dry the bangs down and use a round brush on the length. Trim the bangs every four weeks.
13. Long Bob for Over 60
My long bob over 60 holds the perimeter at the collarbone with long layers and a soft fringe, and the ends are point cut so they stay thick. Everything is cut on dry hair and point cut throughout, then lightly texturized. Fine to medium density with 1A to 2A texture suits it. Use a smoothing cream and a round brush to blow-dry. Trim every eight weeks and gloss every eight.
14. The Sleek Long Bob
Because a sleek long bob shows the perimeter against a flat surface, the line must be clean. With hair dry and the shears flat, I cut the perimeter at the collarbone and texturize only the final half inch. Fine to thick density and 1A to 1C texture suit it on oval and square faces. Blow-dry flat with a paddle brush, flat iron over a heat protectant, and finish with serum. Trim every eight weeks.
15. Layered Long Bob Haircuts for Round Faces
For a round face, long bob haircuts begin the layers below the chin and keep the crown lifted. Working dry, I cut the perimeter at the collarbone with point cut ends, point cut layers starting below the chin, and point cut short crown layers. Fine to thick density with 1A to 2B texture suits it. Use a round brush to lift the crown and keep the sides smooth as you blow-dry. Trim every eight weeks.
16. Money-Piece Long Bob
On a long bob, a money piece lightens the two front sections and leaves everything else dark. With hair dry, I cut the perimeter at the collarbone with point cut ends, then lift the two front sections root to end to level nine and tone them beige. Fine to medium density and 1A to 2B texture suit it. Use a round brush to blow the front out. Refresh every ten weeks.
17. The Textured Long Bob
For a textured long bob, I point cut deep into the ends so the perimeter looks soft rather than solid. Working dry, I cut the perimeter at the collarbone, point cut an inch into the ends, and add a single layer at the chin. Medium to thick density with 1B to 2B texture suits it on oval and square faces. Use texture spray to rough-dry and bend the ends with a flat iron. Trim every eight weeks.
18. Side-Swept-Bang Long Bob
On a long bob, side swept bangs go from the part to the cheekbone and melt into the length. With hair dry, I cut the perimeter at the collarbone with point cut ends, then cut the bangs from the part down to the cheekbone. Fine to medium density and 1A to 2B texture suit it on round and square faces. Use a flat brush to blow the bangs across and a round brush on the length. Trim the bangs every five weeks.
19. The Copper Long Bob
On a long bob, copper looks bright against the clean collarbone line. Working dry, I cut the perimeter with point cut ends, then put level seven copper at the root and a demi through the ends. Fine to medium density and warm skin tones suit it. Use a round brush to blow-dry and finish with serum. Trim every eight weeks and refresh the tone every five.
20. Balayage Layered Long Bob Haircuts
With balayage on long bob haircuts with layers, I paint the ends of each layer so every piece gets its own bright tip. With hair dry, I cut the perimeter at the collarbone with point cut ends, point cut layers from the chin, and hand paint the last three inches of every layer to level nine. Fine to thick density and 1A to 2B texture suit it. Use a round brush to blow-dry. Refresh every twelve weeks.
21. Long Bob Cut for Square Faces
For a square face, long bob haircuts hold the perimeter at the collarbone and curve the face frame outward before the jaw. Working dry, I cut the perimeter with point cut ends, then point cut a face frame from cheekbone to collarbone. Fine to thick density with 1A to 2B texture suits it. Use a round brush to blow-dry the face frame back off the face. Trim every eight weeks.
22. Shadow-Root Long Bob
On a blonde long bob, a shadow root keeps depth at the part and stretches the time between color appointments. With hair dry, I cut the perimeter at the collarbone with point cut ends, then put a level six demi on the root and leave the lengths at level nine. Fine to medium density and 1A to 2B texture suit it. Use a round brush to blow-dry. Trim every eight weeks and refresh the root every ten.
23. Long Bob Cut for Straight Hair
On straight hair, a long bob needs a blunt perimeter and a single chin layer so the ends have room to bend. Working dry with the shears flat, I cut the perimeter at the collarbone, then point cut one layer at the chin. Fine to medium density with 1A to 1C texture suits any face shape. Use a round brush to blow-dry and a flat iron to bend the ends outward. Trim every eight weeks.
24. The Dark Brunette Long Bob
On a long bob, dark brunette makes the collarbone line look sharp. With hair dry and the shears flat, I cut the perimeter, then apply a level four demi root to end. Fine to thick density and cool or neutral skin tones suit it. Use a paddle brush to blow-dry flat and finish with serum. Trim every eight weeks and refresh the tone every eight.
25. Air-Dry Layered Long Bob Haircuts
Long bob haircuts made to air-dry get one chin layer and a side part, so the shape falls into place with no brush. Working dry, I cut the perimeter at the collarbone with point cut ends, then point cut a single layer at the chin. Fine to medium density with 1C to 2B texture suits any face shape. Smooth a light cream through damp hair, side part it, and don’t touch it until dry. Trim every eight weeks.
Read next: angled bob haircuts and pixie haircut for round faces.
Long bob haircuts stay simple at the collarbone with point-cut ends, because that length grows out clean and usually needs a trim only every eight weeks. Air-dry with a slight inward turn and it sits.
























