Soft Shag Haircut: Gentle Layers, Rounded Frame

A soft shag haircut that’s point cut on dry hair grows out without visible steps, so it still looks intentional by the eight-week trim. It sits best on fine to medium density with straight to loose wavy texture, and most versions need only a round brush, or a light cream and a few hours of air-drying.

1. Long Blended-Layer Soft Shag Haircut

My most frequent soft shag haircut leaves the layers long and blended, so the shape moves with no visible steps. On dry hair I cut the perimeter past the collarbone, point cut layers from the cheekbone with the shears held close to vertical, and lightly texturize the crown. Fine to medium density and 1A to 2B texture suit it on most face shapes. Blow-dry using a round brush and keep the ends loose. Trim every eight weeks.

2. Collarbone Soft Shag Haircut Mid Length

This soft shag haircut mid length lands at the collarbone, with layers beginning at the chin and no hard line at the crown. Working dry, I set the perimeter at the collarbone, point cut layers from the chin, and point cut the crown to five inches so it lifts yet blends. It works on fine to medium density and 1A to 2B texture. Rough-dry with a light cream, then bend the ends with a flat iron. Trim every eight weeks.

3. Curtain-Bang Soft Shag

On a soft shag, I leave curtain bangs long and point cut them so they melt into the face frame. On dry hair I cut the collarbone perimeter and point cut layers from the chin, then section a triangle and cut the bangs from the cheekbone to the jaw. Fine to medium density and 1B to 2B texture on round and square faces suit it. Use a small round brush to blow-dry the bangs out. Trim every six weeks.

4. Fine-Hair Soft Shag

For fine hair, a soft shag keeps a solid perimeter and only a few layers so the ends stay full. Working dry, I cut the collarbone perimeter with the shears flat, point cut two long layers from the chin, and texturize just the crown. It suits fine density with 1A to 2A texture on oval and oblong faces. Put mousse on damp roots and use a round brush to blow-dry the crown up. Trim every six weeks.

5. Wispy-Bang Soft Shag

I point cut wispy bangs thin on a soft shag so they sit between the brows. On dry hair I set the perimeter at the collarbone and point cut layers from the chin, then cut the bangs at the brow and keep point cutting until they separate. Fine to medium density and 1A to 2A texture on oval and oblong faces suit it. Blow-dry the bangs down using a small brush and air-dry everything else. Trim the bangs every four weeks.

6. Side-Part Soft Shag Haircut Mid Length

With a side part, a soft shag haircut mid length lets the layers fall into a single sweep. Working dry, I cut the perimeter at the shoulder, point cut layers from the chin, and part two inches off center. It suits fine to thick density and 1A to 2B texture on round and square faces. Blow-dry using a round brush and push the heavy side back. Trim every eight weeks.

7. Thick-Hair Soft Shag

On thick hair, I use point cut internal layers rather than a razor in a soft shag, which removes bulk without fraying the ends. On dry hair I cut the perimeter past the collarbone, point cut internal layers through the sides, and point cut the crown to five inches. Thick density and 1B to 2C texture suit it on any face shape. Rough-dry using a light cream and let the ends fall naturally. Trim every eight weeks.

8. Soft Shag Haircut for Women Over 50

For clients over 50, I hold the crown layers at five inches and point cut the ends so they keep their thickness, adding a side swept fringe to the cheekbone. Working dry, I set the perimeter at the shoulder, point cut the layers and fringe, and texturize lightly. Fine to medium density and 1A to 2A texture suit it. Blow-dry with a smoothing cream and a round brush. Trim every eight weeks.

9. The Soft Wavy Shag

On 2A to 2C hair, a soft wavy shag gives each wave its own layer without breaking it into pieces. On dry hair I cut the perimeter at the collarbone, point cut layers from the chin, and point cut the crown to five inches. It works with fine to medium density on any face shape. Scrunch mousse into damp hair, part it to one side, and air-dry with the crown clipped up. Trim every eight weeks.

10. Face-Framing Soft Shag Haircut Mid Length

In this soft shag haircut mid length with face framing layers, I keep the frame long, starting at the cheekbone and curving down to the collarbone. Working dry, I cut the perimeter at the shoulder, point cut the face frame from the cheekbone, and point cut the crown to five inches. Fine to thick density and 1A to 2B texture suit it. Use a round brush to blow-dry the face frame away from the face. Trim every eight weeks.

11. Bottleneck-Bang Soft Shag

On a soft shag, bottleneck bangs hit the brow in the center and blend into the face frame at the cheekbone. On dry hair I cut the collarbone perimeter and point cut layers from the chin, then section a triangle and cut the bangs. Fine to medium density and 1B to 2B texture on oval and oblong faces suit it. Use a small round brush to blow-dry the bangs. Trim every four weeks.

12. The Long Soft Shag

My long soft shag keeps the length past the shoulder, starts the layers at the chin, and leaves the crown at six inches. Working dry, I cut the perimeter past the shoulder, point cut layers from the chin, and point cut the crown. It suits medium to thick density and 1A to 2C texture on round, square, and oval faces. Rough-dry using a light cream and finish the crown with texture spray. Trim every ten weeks.

13. Straight-Hair Soft Shag Haircut

Straight hair in a soft shag haircut needs each layer point cut, or the ends line up in rows. On dry hair I set the perimeter at the collarbone, point cut layers from the chin, and point cut deep into the face frame from the cheekbone. Fine to medium density and 1A to 1C texture suit it on any face shape. Use a round brush to blow-dry, then bend the ends outward with a flat iron. Trim every eight weeks.

14. Side-Swept-Fringe Soft Shag

I cut a side swept fringe on a soft shag from the part to the cheekbone and blend it into the face frame. Working dry, I cut the collarbone perimeter, point cut layers from the chin, and cut the fringe from the part down to the cheekbone. Fine to medium density and 1A to 2B texture on round and square faces suit it. Use a flat brush to blow-dry the fringe across. Trim the fringe every five weeks.

15. Balayage Soft Shag

When I add balayage to a soft shag, I paint the last three inches of each layer so the light lives at the ends. On dry hair I cut the perimeter at the collarbone, point cut layers from the chin, and hand paint every layer’s ends to a level nine. Fine to thick density and 1B to 2B texture suit it. Blow-dry using a round brush and finish with serum. Refresh every twelve weeks.

16. Soft Shag Haircut Mid Length for Women Over 40

For clients over 40, a mid length soft shag keeps the layers soft, the crown at five inches, and the face frame starting at the cheekbone. Working dry, I set the perimeter at the shoulder, point cut layers from the chin, and point cut the face frame. Fine to medium density and 1A to 2B texture suit it. Blow-dry using a round brush with smoothing cream through the ends. Trim every eight weeks.

17. The Short Soft Shag

This short soft shag lands at the jaw, with a four-inch crown and sides that are point cut instead of razored flat. On dry hair I cut the perimeter at the jaw, point cut the crown to four inches, and point cut the sides so they fall softly. It suits fine to medium density and 1B to 2B texture on oval and heart faces. Rough-dry using a light paste and move the crown around. Trim every six weeks.

18. Money-Piece Soft Shag

Adding a money piece to a soft shag brightens the face frame and keeps the layers dark. Working dry, I cut the collarbone perimeter and point cut layers from the chin, then lift the two front sections to a level nine and tone them beige. Fine to medium density and 1A to 2B texture suit it. Use a round brush to blow-dry the front pieces away from the face. Refresh every ten weeks.

19. Round-Face Soft Shag

For a round face, a soft shag starts the face frame below the chin and keeps the crown lifted. On dry hair I set the perimeter at the collarbone, point cut the face frame from below the chin, and point cut the crown to four inches. Fine to thick density and 1A to 2B texture suit it. Use a round brush to blow-dry the crown up and the face frame away from the cheek. Trim every eight weeks.

20. Soft Shag Haircut for Women Over 60

With a soft shag haircut over 60, I hold the perimeter at the shoulder and the layers at five inches, and sweep the fringe to the side down to the cheekbone. I point cut throughout on dry hair, then lightly texturize the ends. Fine to medium density and 1A to 2A texture suit it. Use mousse and a round brush to blow-dry the crown up. Trim every eight weeks and gloss every eight.

21. The Copper Soft Shag

In copper, a soft shag shows its layers in the light with no visible step. Working dry, I cut the collarbone perimeter and point cut layers from the chin, then apply a level seven copper root to end. It suits fine to medium density and warm skin tones. Blow-dry using a round brush and finish with serum. Refresh the tone every five weeks.

22. Center-Part Soft Shag With Curtain Fringe

Pairing a center part and a curtain fringe on a soft shag frames the face evenly. On dry hair I cut the collarbone perimeter and point cut layers from the chin, then section a triangle and cut the fringe from the brow down to the cheekbone. Fine to medium density and 1B to 2B texture on oval and heart faces suit it. Use a small round brush to blow-dry the fringe out. Trim the fringe every five weeks.

23. Air-Dried Soft Shag Haircut Mid Length

For a soft shag haircut mid length that air-dries, I cut the crown to five inches and start the face frame at the chin. Working dry, I set the perimeter at the shoulder, point cut the crown and face frame, and texturize the ends. Fine to medium density and 1C to 2B texture suit it. Work a light cream into damp hair, part it to one side, and don’t touch it until it’s dry. Trim every eight weeks.

24. Shadow-Root Soft Shag

On a blonde soft shag, a shadow root holds depth at the crown and brightness at the ends. On dry hair I cut the collarbone perimeter and point cut layers from the chin, then put a level six demi on the root and leave the lengths at level nine. Fine to medium density and 1A to 2B texture suit it. Blow-dry using a round brush. Refresh the root every ten weeks.

25. Square-Face Soft Shag

For a square face, I curve the soft shag’s face frame out before it reaches the jaw so the corners look softer. Working dry, I set the perimeter at the collarbone, point cut the face frame from the cheekbone, and point cut the crown to five inches. Fine to thick density and 1A to 2B texture suit it. Use a round brush to blow-dry the face frame away from the face. Trim every eight weeks.

For a fuller picture, see fairy shag haircut and wavy shag haircut.

A soft shag haircut reads easiest with gentle layers and a rounded face frame, because the shape comes from movement not chop. A wide-tooth comb through wet hair is most of the styling.

Jenna Living
New mom embracing the chaos and creativity! 💕 Sharing budget-friendly tips for cooking, DIY hacks, home decor, fashion, and making every moment stylish and affordable
Scroll to Top