Hair for Oblong Face Shape: Stop the Length

Most cuts I give an oblong face land between the chin and the collarbone, with a fringe or side part doing much of the work. The aim is width at the cheekbone and jaw, less forehead, and a flat crown. These are the haircuts for an oblong face shape I reach for, with density, texture, and trim timing for each.

1. Blunt-Fringe Chin-Length Bob

When a client asks me for hair for oblong face shape, this is my first suggestion: a chin length bob with a blunt fringe. The fringe makes the forehead shorter and the bob builds width at the jaw. On dry hair I cut the perimeter at the chin, shears flat, then take the fringe to the brow. Fine to medium density and 1A to 1C texture work best. Blow it dry flat with a paddle brush, fringe pointed down. Trim every five weeks.

2. Waves at Shoulder Length

An oblong face needs width at the cheekbone and jaw, and shoulder length waves push it out right there. On dry hair I set the perimeter at the shoulder with point cut ends and add a single long layer at the chin. Best for fine to medium density and 1B to 2B texture. Use a one-inch iron to wave away from the face, then loosen it with a light spray. Trim every eight weeks.

3. Lob With Curtain Bangs

On an oblong face, curtain bangs do two jobs: they hide part of the forehead and they open out at the cheekbone, so the face looks shorter. I set the perimeter at the collarbone on dry hair with point cut ends, section a triangle, and cut the bangs from brow to cheekbone. Fine to medium density and 1B to 2B texture suit it. Use a small round brush to blow the bangs out. Trim the bangs every five weeks.

4. Side-Volume Short Hair for Oblong Face Shape

For short hair for oblong face shape clients, the volume has to sit at the sides, never the crown. On dry hair I cut a jaw-length bob with point cut ends, point cut internal layers through the sides, and leave the crown flat. Fine to medium density and 1B to 2B texture work well. Use a round brush to blow the sides out and keep the top smooth. Trim every six weeks.

5. Shoulder-Length Layers With a Wispy Fringe

Without the heaviness of a blunt fringe, a wispy one still takes an inch off how much forehead shows. On dry hair I cut the fringe at the brow and point cut deep into it, then set the length at the shoulder with layers starting at the chin. On an oblong face it suits fine to medium density and 1A to 2A texture. Dry the fringe down with a small brush and the rest over a round brush. Trim the fringe every four weeks.

6. Jaw-Length Side-Part Bob

Moving the part to the side on a jaw length bob interrupts the vertical line running down the middle of an oblong face. On dry hair I cut the perimeter at the jaw with point cut ends, part on the heavier side, and point cut one layer at the cheekbone. Fine to medium density and 1A to 2A texture suit it. Use a round brush and roll the heavy side under as you dry. Trim every six weeks.

7. Hair for Oblong Face Shape Over 50: Soft Bob

Of all the hair for oblong face shape over 50 I cut, a chin length bob with soft layers and a side swept fringe comes up most. On dry hair I set the perimeter at the chin with point cut ends, point cut layers from the cheekbone, and cut the fringe from the part down to the cheekbone. Fine to medium density and 1A to 2A texture suit it. Dry with a round brush and a smoothing cream. Trim every six weeks.

8. The Shaggy Lob

With texture at the cheekbone and jaw, a shaggy lob makes an oblong face look wider. On dry hair I set the perimeter at the collarbone, point cut layers from the cheekbone, razor the face frame, and keep the crown long. Medium to thick density and 1B to 2C texture work best. Rough-dry with texture spray, then scrunch the ends. Trim every eight weeks.

9. Chin-Length Blunt Bob

At the bottom of an oblong face, a blunt chin bob lays down a horizontal line. On dry hair I cut the perimeter at the chin with flat shears and texturize just the final half inch. Fine to thick density and 1A to 1C texture suit it. Dry it flat with a paddle brush, part it to one side, and finish with serum. Trim every six weeks.

10. Curtain-Bang Short Hair for Oblong Face Shape

With curtain bangs, short hair for oblong face shape clients keeps the bob at the chin while the bangs drop to the cheekbone. On dry hair I set the perimeter at the chin with point cut ends, section a triangle, and cut the bangs from brow to cheekbone. Fine to medium density and 1B to 2B texture work well. Use a small round brush to dry the bangs out. Trim the bangs every five weeks.

11. Long Layers With a Full Fringe

On long hair, a full fringe splits the forehead in half and keeps the length from dragging an oblong face longer. On dry hair I cut the fringe at the brow with flat shears, then point cut long layers from the chin to give the sides movement. Medium to thick density and 1A to 1C texture suit it. Dry the fringe down with a flat brush and the length over a round brush. Trim the fringe every four weeks.

12. Hair for Oblong Face Shape Over 60: Chin Cut With Fringe

When I cut hair for oblong face shape over 60, the perimeter stays at the chin, with soft layers and a fringe at the brow. On dry hair I cut the perimeter with point cut ends, point cut layers from the cheekbone, and take the fringe to the brow before point cutting it. Fine to medium density and 1A to 2A texture work best. Dry with a round brush and a smoothing cream. Trim every six weeks and gloss every eight.

13. Side-Swept-Fringe Pixie

On an oblong face, a pixie with a side swept fringe works as long as the top stays low and the fringe moves sideways. On dry hair I take the sides and nape down with scissor over comb, keep three inches on top, and cut the fringe from the part to the cheekbone. Fine to medium density and 1A to 2A texture suit it. Dry the fringe across with a flat brush and keep the crown flat. Trim every five weeks.

14. Side-Part Layered Lob

Sitting at the collarbone, a layered lob with a side part is as long as I take an oblong face when there is no fringe. On dry hair I set the perimeter at the collarbone with point cut ends, point cut layers from the cheekbone, and part on the heavier side. Fine to medium density and 1A to 2B texture work well. Use a round brush and roll the sides out. Trim every eight weeks.

15. Wavy Short Hair for Oblong Face Shape

For short hair for oblong face shape clients with wave, the chin is the best spot, since the bend there adds width next to the jaw. On dry hair I set the perimeter at the chin with point cut ends and keep the interior solid. Fine to medium density and 2A to 2C texture suit it. Scrunch sea salt spray into damp hair, part it to one side, and let it air-dry. Trim every six weeks.

16. Jaw-Length Curly Bob

At the jaw, a curly bob gives an oblong face the width curl brings without the length that pulls it longer. On dry hair I cut the perimeter at the jaw one curl at a time, then add layers from the cheekbone so the curls stack out to the sides. Medium to thick density and 3A to 3C texture suit it. Rake curl cream through wet hair and diffuse on low. Trim every eight weeks.

17. Bob With Bottleneck Bangs

Narrow at the brow and flaring out at the cheekbone, bottleneck bangs cover the forehead and widen the face in one move. On dry hair I set the perimeter at the chin with point cut ends, section a triangle, and cut the bangs short in the middle and longer toward the cheekbone. On an oblong face it suits fine to medium density and 1B to 2B texture. Use a small round brush on the bangs. Trim every four weeks.

18. Face-Framing Layers at Shoulder Length

Where an oblong face is narrowest, face framing layers that begin at the cheekbone and curve outward add width. On dry hair I set the perimeter at the shoulder with point cut ends, then point cut the face frame from cheekbone to collarbone. Fine to thick density and 1A to 2B texture suit it. Use a round brush to dry the face frame away from the face. Trim every eight weeks.

19. Chin-Length Hair With a Side Swept Fringe

On chin length hair, a side swept fringe brings the forehead down and puts width out at the same time. On dry hair I set the perimeter at the chin with point cut ends, then cut the fringe from the part to the cheekbone, also with point cut ends. On an oblong face it suits fine to medium density and 1A to 2A texture. Dry the fringe across with a flat brush and turn the bob under. Trim every six weeks.

20. The Razor Cut Bob

Soft razored ends at the jaw make the width read as texture instead of a hard shelf. On dry hair I cut the perimeter at the jaw, razor the final two inches, and razor face framing pieces from the cheekbone. On an oblong face it suits medium to thick density and 1B to 2B texture. Rough-dry with a light cream and let the ends fall where they want. Trim every six weeks.

21. Blunt-Fringe Short Hair for Oblong Face Shape

Of every short hair for oblong face shape detail, a blunt fringe is the one I add most, since one line covers the forehead. On dry hair I cut a jaw-length bob with point cut ends, then take the fringe to the brow with flat shears. Fine to medium density and 1A to 1C texture suit it. Dry the fringe down with a flat brush and the bob over a round brush. Trim the fringe every four weeks.

22. Shoulder-Length Waves With Balayage

On shoulder length waves, balayage places the brightest pieces at the cheekbone, so the eye picks up width there. On dry hair I set the perimeter at the shoulder with point cut ends and a chin layer, then hand paint to a level nine from the cheekbone downward. On an oblong face it suits fine to thick density and 1B to 2B texture. Wave with a one-inch iron and finish with serum. Refresh every twelve weeks.

23. Fringed Wolf Cut

On a wolf cut with a fringe, I keep the crown layers short so they drop sideways, while the fringe covers the forehead. On dry hair I cut the fringe at the brow, point cut short layers through the crown, and razor the lengths past the shoulder. On an oblong face it suits medium to thick density and 1B to 2C texture. Rough-dry with texture spray and push the crown outward, not upward. Trim every eight weeks.

24. Chin-Length Bob With One Side Tucked

Tuck one side of a chin length bob and the other side stays full, widening an oblong face on that heavy side. On dry hair I set the perimeter at the chin with point cut ends, then texturize the tucked side slightly shorter. Fine to medium density and 1A to 2A texture suit it. Round-brush the heavy side out, tuck the other, and set it with a light spray. Trim every six weeks.

25. Fringe and Soft Waves Over 40

On shoulder length hair, soft waves with a fringe give an oblong face over 40 width at the sides and cover at the forehead. On dry hair I set the perimeter at the shoulder with point cut ends, cut the fringe at the brow and point cut it, and add layers from the chin. Fine to medium density and 1A to 2B texture suit it. Wave with a one-and-a-quarter-inch iron, then brush it out. Trim every eight weeks.

See also hair for round face shape double chin and hair for rectangle face shape.

Hair for an oblong face shape reads better with width at the cheek and less drop at the back, since more length only stretches the face further. A curtain fringe cut to the brow is what shortens the look.

Jenna Living
New mom embracing the chaos and creativity! 💕 Sharing budget-friendly tips for cooking, DIY hacks, home decor, fashion, and making every moment stylish and affordable
Scroll to Top