Thick Coarse Hair: Bring the Texture Down

Thick coarse hair can take forty minutes to blow-dry and still puff out at the ends by afternoon if the cut leaves too much bulk underneath. The haircuts for thick coarse hair that hold up best keep weight at the perimeter and take it out of the interior, usually by slide cutting on dry hair.

1. Long-Layered Collarbone Lob

Coarse strands need length to weigh them down, so a collarbone lob with long layers is the first of the haircuts for thick coarse hair I recommend. On dry hair I cut the perimeter with point cut ends, point cut layers starting at the chin, and slide cut out the bulk underneath. Thick density with 1B to 2B texture works on most face shapes. Blow it dry with a smoothing cream and a round brush, then seal with oil. Trim it every eight weeks.

2. Blunt-Cut Shoulder Length Style

Coarse hair gets weight at the ends from a blunt perimeter, so the strands lie down. With flat shears on dry hair, I cut the perimeter at the shoulder, then slide cut through the interior to debulk it, leaving the final two inches solid. Thick density in 1A to 1C texture suits long and oval faces. Use a smoothing cream and a paddle brush to blow-dry, then flat iron over the surface. Trim it every eight weeks.

3. Long Layers Over a Debulked Interior

On thick coarse hair, long layers only move once the interior is debulked and the ends stay heavy. On dry hair I cut a mid back perimeter, point cut layers starting at the collarbone, and slide cut out the bulk underneath. Thick density with 1B to 2B texture works on most face shapes. Apply a heat protectant, blow-dry with a large round brush, and seal with oil. Trim it every ten weeks.

4. Curtain-Bang Haircuts for Thick Coarse Hair

Curtain bangs on thick coarse hair need a narrow section and some length, or the strands stand out from the face. I take a narrow triangle, cut the bangs from the cheekbone down to the jaw on dry hair, and point cut the collarbone perimeter. Thick density in 1C to 2B texture suits square and oval faces. Use a round brush to blow the bangs out. Trim the bangs every six weeks.

5. Shoulder Length Cut With Hidden Internal Layers

Coarse hair loses its bulk through internal layers, while the surface still reads as one smooth sheet. With flat shears on dry hair, I cut the perimeter at the shoulder, then cut layers underneath that never come through to the surface. Thick density with 1A to 2A texture works on most face shapes. Use a smoothing cream and a paddle brush to blow-dry, then seal with oil. Trim it every eight weeks.

6. Layered Wavy Lob

At the collarbone, thick coarse wavy hair needs layers so the waves stack rather than expand. On dry hair I cut the collarbone perimeter, point cut layers starting at the chin, and slide cut out the bulk underneath. Thick density in 2A to 2C texture suits long and oval faces. Rake curl cream through soaking wet hair, diffuse it on low, then seal with oil. Trim it every eight weeks.

7. Over-50 Haircuts for Thick Coarse Hair

Most of the haircuts for thick coarse hair over 50 that I do land at the collarbone, with long layers and a soft side fringe. On dry hair I cut the perimeter with point cut ends, point cut layers starting at the jaw, and cut the fringe running from the part to the cheekbone. Thick density with 1B to 2A texture works on round and oval faces. Blow it dry with a smoothing cream and a round brush. Trim it every eight weeks.

8. Sleek Blown-Out Lob

With a sleek blowout, coarse hair stays flat for a week at a time. With flat shears on dry hair, I cut the perimeter at the collarbone, then cut internal layers that never come through to the surface. Thick density in 1A to 2A texture suits square and oval faces. Blow it dry in small sections with a heat protectant and a round brush, then run a flat iron over the surface and finish with oil. Trim it every eight weeks.

9. Long-Layered Curly Cut

I cut thick coarse curls curl by curl on dry hair so each layer lands where the curl sits. One curl at a time, I cut the perimeter at the shoulder blade, then cut long layers from the collarbone and take nothing out underneath. Thick density with 3A to 3C texture works on long and oval faces. Rake gel through soaking wet hair, scrunch, and diffuse until it’s fully dry. Trim it every twelve weeks.

10. Below-the-Chin Blunt Bob

Cut below the chin, a blunt bob shows coarse hair at its heaviest and looks clean. With flat shears on dry hair, I cut the perimeter an inch below the chin, then slide cut heavily through the interior to stop the ends flaring. Thick density in 1A to 1C texture suits long and oval faces. Blow it dry flat with a smoothing cream and a paddle brush, then finish with oil. Trim it every six weeks.

11. Face-Framing Lob

On a lob, face framing layers open up the face and leave the weight in the back alone. On dry hair I cut the collarbone perimeter, point cut the front pieces from the jaw downward, and slide cut the ends. Thick density with 1B to 2A texture works on square and round faces. Use a round brush to blow the front out, dry the back smooth, and seal with oil. Trim it every eight weeks.

12. Balayage Lob

Coarse strands lift slowly and dry out, so balayage on thick coarse hair needs a bond builder mixed into the lightener. On dry hair I cut the collarbone perimeter with point cut ends and slide cut the interior, then hand paint level eight through the ends and tone it beige. It works on thick density with 1B to 2B texture. Use a round brush to blow-dry and seal with oil. Trim every eight weeks and refresh every sixteen.

13. Over-60 Haircuts for Thick Coarse Hair

With haircuts for thick coarse hair over 60, I hold the perimeter at the chin and keep the layers long so the hair stays smooth. On dry hair I cut the perimeter with point cut ends, point cut layers starting at the jaw, and slide cut out the bulk. Thick density in 1B to 2A texture suits round and oval faces. Blow it dry with a smoothing cream and a round brush. Trim every six weeks and gloss every ten.

14. Razored Shag

In a single pass, a razor cut shag pulls the most weight out of thick coarse hair, though I keep the razor away from the ends. On dry hair I razor short layers from the crown down to the occipital, hold the perimeter at the collarbone, and point cut the ends. Thick density with 1C to 2C texture works on heart shaped and oval faces. Rough-dry it with a cream and push up the crown. Trim it every six weeks.

15. Wispy-Bang Shoulder Length Cut

For wispy bangs on coarse hair, I take just a narrow section so the fringe doesn’t stand out. On dry hair I cut the shoulder perimeter with point cut ends, section a narrow triangle, and cut the bangs at the brow with the shears pointed straight in. Thick density in 1B to 2A texture suits oval and long faces. Blow-dry the bangs with a smoothing cream and a small round brush. Trim the bangs every four weeks.

16. Money-Piece Lob

On thick coarse hair, a money piece brightens the face frame without lightening the whole head. On dry hair I cut the collarbone perimeter with point cut ends, then lift both front sections to level nine with a bond builder and tone beige. Thick density with 1B to 2B texture works on round and oval faces. Use a round brush to blow the front out and seal with oil. Refresh it every ten weeks.

17. Stacked Graduated Bob

Stacking the back in a graduated bob lets thick coarse hair hold a shape rather than push out. Working on dry hair, I cut the nape short with graduation, build the weight line at the occipital, and keep the front at the jaw. Thick density in 1A to 1C texture suits round and oval faces. Blow it dry rolling under with a smoothing cream and a round brush, then seal with oil. Trim it every five weeks.

18. Air-Dry Haircuts for Thick Coarse Hair

Long layers with heavy ends make the haircuts for thick coarse hair that air-dry best. On dry hair I cut the collarbone perimeter with point cut ends, point cut layers starting at the chin, and slide cut the interior. Thick density with 1C to 2B texture works on most face shapes. Rake a leave-in and a cream through soaking wet hair, part it to one side, and don’t touch it until it’s dry. Trim it every eight weeks.

19. Deep Side-Part Shoulder Length Cut

Shifting the volume of coarse hair to one side with a deep side part makes it look intentional. On dry hair I cut the shoulder perimeter with point cut ends, cut long layers starting at the chin, and part deep on the heavier side. Thick density in 1B to 2B texture suits square and round faces. Use a round brush to blow the heavy side across, then seal with oil. Trim it every eight weeks.

20. Lowlighted Lob

On thick coarse blonde hair, lowlights add depth without any lightener. On dry hair I cut the collarbone perimeter with point cut ends, then weave level six lowlights all through the head and gloss the ends. Thick density with 1B to 2A texture works on most face shapes. Apply a heat protectant, blow-dry with a round brush, and seal with oil. Trim every eight weeks and refresh every twelve.

21. Long Haircut With Hidden Internal Layers

On long thick coarse hair, internal layers remove the bulk and the surface stays smooth. With flat shears on dry hair, I cut the perimeter at the mid back, then cut layers underneath that never come through to the surface. Thick density in 1A to 2A texture suits most face shapes. Use a smoothing cream and a paddle brush to blow-dry, then seal with oil. Trim it every ten weeks.

22. Tapered-Side Long Pixie

On thick coarse hair, a long pixie keeps four inches on top so the strands have enough weight to lie down. On dry hair I cut the sides and nape scissor over comb, leave the top long, and slide cut heavily through the interior. Thick density with 1B to 2A texture works on heart shaped and oval faces. Blow the top forward with a smoothing cream and finish with a light paste. Trim it every five weeks.

23. Glasses-Friendly Haircuts for Thick Coarse Hair

For anyone in glasses, I cut thick coarse hair so the front pieces sit behind the frame arms and the perimeter falls below the chin. On dry hair I cut the collarbone perimeter with point cut ends, cut the front pieces at the jaw so they tuck, and slide cut the interior. Thick density in 1B to 2A texture suits round and oval faces. Blow it dry rolling under with a round brush. Trim it every eight weeks.

24. Lob With a Tapered Nape

Coarse hair is heaviest at the neck, and a tapered nape under a lob takes that bulk away. On dry hair I taper the nape scissor over comb, cut the collarbone perimeter with point cut ends, and slide cut the interior. Thick density with 1B to 2B texture works well on a short neck. Blow it dry rolling under with a round brush and seal with oil. Trim it every six weeks.

25. Copper-Toned Lob

The cuticle on thick coarse hair takes copper pigment and keeps it, so the color holds well. On dry hair I cut the collarbone perimeter with point cut ends, point cut layers starting at the chin, then apply level seven copper at the root with a demi on the ends. It works on thick density and warm skin tones. Use a round brush to blow-dry and seal with oil. Trim every eight weeks and refresh the tone every six.

Another angle: short hair for round face and medium hair round face.

Haircuts for thick coarse hair need the texture brought down with slide cutting, since coarse hair holds its width and won’t relax on its own. I keep the perimeter heavy and take the interior with the shear, so the ends still feel soft.

Jenna Living
New mom embracing the chaos and creativity! 💕 Sharing budget-friendly tips for cooking, DIY hacks, home decor, fashion, and making every moment stylish and affordable
Scroll to Top